你好, 欢迎访问昆山久康祥机械有限公司网站!

邮箱:info@abrasives-depot.com| English

昆山久康祥机械有限公司

专业生产各种规格千叶轮

客户服务热线

186-0629-8270

465mm x 225mm Jumbo Flap Wheel

◀ Flap sanding wheels for stainless steel nonmetal surface grinding

◀ 产品分类:千页翼片砂轮

◀ 编号:JFW425AO
◀ Material: Silicon Carbide Abrasive cloth;Outside Diameter:100/150/ 200/ 250/ 300/ 350/400/ 450 mm;Thickness: 10/ 12/ 15/ 20/ 25/ 30/ 40/ 45/ 50/ 60/ 65/ 75/ 80/ 95/ 100/ 120/250 mm;Bore Size:16/ 25.4/32/ 36/38.1/ 127/ 185

咨询服务热线:
186-0629-8270

  • 分享:

详情

* 我们欢迎您的定制要求.

◀ Backing: Polyester/Polycotton/pure cotton

◀ Outside Diameter:100/150/ 200/ 250/ 300/ 350/400/ 450 mm

◀ Thickness: 10/ 12/ 15/ 20/ 25/ 30/ 40/ 45/ 50/ 60/ 65/ 75/ 80/ 95/ 100/ 120 mm

◀ Bore Size:16/ 25.4/32/ 36/38.1/ 127/ 185 mm

Grits:24#/40#/ 60#/ 80#/ 100#/ 120#/150#/180#/ 240#/ 320#/ 400#/ 600#/ 800#/ 1000#/ 1200#



FEATURES

◀ High quality silicon carbide cloth

◀ High working efficiency stable grinding quality

◀ No burning work-pieces

◀ Easily continuous operating.



APPLICATION

◀ Nonmetal, non ferrous metal surface grinding and polishing, weld seams grinding, rust removing



ADVANTAGE

◀ Silicon Carbide Flap wheels are conformable to intricate shapes and contours, high working efficiency, stable grinding quality, no burning working-pieces, easily continuous operating.

◀ Design to deliver a consistent finish with a uniform rate of cut, flap wheels wear away,continually exposing fresh abrasive.

◀ Silicon Carbide abrasive cloth substrate keep synchronous consumption. Good heat dissipation, do not burn work-piece.

◀ for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing wood industries.

Good brightness after grinding, can be used as one-time grinding, no need last procedure of polishing



SAFETY INSTRUCTION

◀ The protective cover is the main protective device of the polishing machine, when the flap wheel is damaged in the work, can effectively cover the impeller, to ensure the safety of personnel.

◀ The balance of the flap wheel is mainly caused by the manufacture and installation of hundreds of flaps of inaccurate, so that the center of gravity and rotary shaft do not coincide.The harm caused by the imbalance is mainly shown in two aspects, on the one hand, in the high speed rotation of the vane wheel, cause vibration, easy to cause the workpiece surface polyangular vibration marks, on the other hand, the unbalanced acceleration of the spindle vibration and bearing wear, serious will cause the vane wheel page rupture, even cause accidents.

◀ The matching problem mainly refers to the installation problem of chuck and flaps. According to the standard requirements, the diameter of the chuck shall not be less than 1/3 of the diameter of the installed sand disc, and the corresponding provisions wear to the diameter larger than the chuck 10mm should be replaced with a new flap wheel.


111.jpg


昆山久康祥机械有限公司
  • 联系人:张先生 186-0629-8270
  • 地址:昆山开发区南河路8号
  • 邮箱:info@abrasives-depot.com
关注我们

欢迎您关注我们的微信公众号

扫一扫 关注我们
版权所有©2021昆山久康祥机械有限公司 All Rights Reserved    苏ICP备2021046494号-1    sitemap.xml
后台管理    技术支持:昆山果橙网络